Skip to main content

Uncategorised

The Team

The Team

Lugano

  • Giacomo Benvegnù

    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Guglielmo Benvegnù

    Guglielmo Benvegnù

    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Claudio Fracassi

    Claudio Fracassi

    International Sales & Leasing
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Roberto Poggi

    Roberto Poggi

    Italy Sales and Accommodation containers
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Gabriele Cilia

    Gabriele Cilia

    Operations & Transport
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Stefano Bennicelli

    Stefano Bennicelli

    Italy and Europe Sales & Leasing
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Gianni Valeri

    Gianni Valeri

    Container Conversions
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Sergio Valente

    Sergio Valente

    International Sales Accommodation containers
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Sogeco Sa
  • The team

    The team

  • Marco Fierravanti

    Marco Fierravanti

    CFO
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Deborah Bocchi

    Deborah Bocchi

    Administration & Billing
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Gabriella Scarpazza

    Gabriella Scarpazza

    Administration & Billing
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Martina Prestini

    Martina Prestini

    Administration & Billing
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Claudio Contin

    Claudio Contin

    Information & Technology
    This email address is being protected from spambots. You need JavaScript enabled to view it.

Genoa

  • Simone Lucattini

    Simone Lucattini

    Italian Sales
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Andrea Miletta

    Andrea Miletta

    Operations
    This email address is being protected from spambots. You need JavaScript enabled to view it.

Leghorn

  • Giulia Guidi

    Italian Sales & Leasing
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Fabio Artz

    Italian Sales & Leasing. Refrigerated Containers
    This email address is being protected from spambots. You need JavaScript enabled to view it.

     

Milan

  • Filippo Grumelli

    Italian Sales & Reefer technician 
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Franco Buffa

    Depot Services 
    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Enzo Romano

    Container assembly & conversions

  • Jacopo Iafreni

    Jacopo Iafreni

    Refrigerated Container This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Christian Buffa

    Christian Buffa

    Operations
    This email address is being protected from spambots. You need JavaScript enabled to view it.

Venice

  • Maurizio Baruzzo

    Depot Services Coordinator

    maurizio.baruzzo@sogecodepo.it

  • Alessandro Baruzzo

    Operations

    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Angelo Trevisan

    Operations

    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Angelo Trovò

    Depot Services

  • Mauro Mazzetto

    Italian Sales and Leasing

    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Cristofer Gaffo

    Stacker operator

  • Daniele De Prà

    Depot services

    This email address is being protected from spambots. You need JavaScript enabled to view it.

  • Leonardo De Prà

    Depot Services

  • Mattia Finessi

    Depot Services

Dubai

Gerald Gimeno

Technical Support & Projects
Accommodation containers

This email address is being protected from spambots. You need JavaScript enabled to view it.

India

Mani Pillai

India Agent

This email address is being protected from spambots. You need JavaScript enabled to view it.

China

Daniel Wong

China Agent

This email address is being protected from spambots. You need JavaScript enabled to view it.

Our Photographer

Gianni Ansaldi

This email address is being protected from spambots. You need JavaScript enabled to view it.

Read more: The Team

Terms & Conditions for sale of goods & services

1. DEFINITIONS a) The “Customer” is any legal person or corporate body who’s order is accepted by the company. b) The “Contract” is the agreement for the supply of goods or services by the company to the customer. c) “Goods” means any goods forming the subject of this contract including parts and components of or materials incorporated in them. d) “Services” means any services forming the subject of this contract.

2. Agreement a) You agree to these terms and conditions applying to and forming part of every contract for the sale of Goods and/or supply of Services entered into between us. b) In the event of any inconsistence between these Conditions and any others, these Conditions will prevail. c) Variations to these Conditions will only be binding if authorised in writing by authorised representatives of the parties, with specific reference to this clause. d) You agree that you are not entering the Contract based on any representations made by us (including our employees and agents) that are not evidenced in writing. e) 1) Where we give quotations for goods, these will constitute an invitation to treat. Your order will only become binding on us once you receive a copy of the invoice for the Goods and/or services (our acknowledgement). 2) Where we give quotations for Services, these will constitute as an estimate only. We reserve the right to amend any quotation to reflect the actual time spent and the actual costs incurred by us in carrying out the Contract and you agree to pay such amendments.

3. Orders and Specifications a) We reserve the right to change the specification of any goods where required to by reason of statue, safety or we reasonably believe the change will not materially affect quality or performance. b) Subject to clause 3.c), you may only cancel this agreement with our written consent and provided all losses (including loss of profit), costs (including the cost of all labour and materials used), damages, charges and expenses reasonably suffered or incurred by us as a consequence of cancellations are reimbursed. c) You will give at least 7 days written notice of any postponement or cancellation of the date for delivery or the provision of services. If you do not give this amount of time then you will pay any additional costs and expenses incurred by us as a result of this postponement.

4. Payment a) The price of the Goods or Services are set out as per the quotation provided and will be quoted ‘ex works’ and exclusive of certification, testing and VAT (at the invoiced date) unless otherwise noted. b) We may increase the price of the Goods or Services and you will pay the increased price if; 1) we give 14 day’s written notice (where possible) and the increase is reasonable, taking into account the following: special requirements and/or equipment required; the change of rules or standards by any authority, government or regulatory body; or 2) any part of the contract is preformed outside of normal working hours (Mon to Fri, 8.30am to 6pm); or 3) there is any increase in our costs which are due to factors out of our control. c) Payment terms are as noted on the contract. If a deposit is specified, you will pay 20% of the price on our acknowledgement and the balance will be paid by you on the earlier completion or delivery or immediately prior to the dispatch of the Goods from our premises. In addition, where the contract is for the delivery by instalments, each instalment will be paid for on the earlier of completion or delivery or immediately prior to dispatch of the Goods from out premises. d) We will invoice you for the amount due under the contract unless you wrongly fail to take delivery of the Goods in which case we can invoice you at any time after we have notified you that the goods are ready for collection or (as the case may be) we have tendered delivery of the Goods. e) Any agreed credit terms will be specified in the contract. If there are no specific credit terms, payment of the price due under the contract will be made on or before the last working day of the month following the month of the invoice delivery. Time is of the essence for all payments due. f) The title of the goods will only pass to the customer once the invoice for such goods have been cleared in full. g) Any failure to make payment on or before the due date may result in us; 1) Charging you interest on any sum outstanding, both before and after any judgement, at a rate of 5% yearly, compounded monthly, from the due date until the actual payment in cleared funds without set-off or deduction.; 2) Cancelling the contract or suspending further deliveries to you; 3) Appropriating any payments made by you for such of the Goods under this or any other contract with us as we see fit (which will not be restricted in any way by your wishes)

5. Delivery a) Any dates quoted for delivery of the Goods, provision of the Services or performance of the contract are approximate only and we will not be liable for any delay of the goods or provisions of the Services or performance of the contract, howsoever caused. We may deliver or provide the Goods and/or Services in advance of the quoted delivery date upon giving you reasonable notice. b) The customer will provide supervision during delivery, supervising the driver delivering and authorising any special requirements made during the delivery process. c) Hauliers used for transportation and delivery of goods reserve the right to reasonably refuse delivery under no uncertain circumstances due to issues arising from, and not limited to; weather conditions, ground conditions, accessibility and obstacles, unless otherwise agreed in advance. d) Where the Goods are to be delivered in instalment each delivery will constitute a separate contract and any failure by us to delivery any one or more of the instalments in accordance with these conditions or any claim by the customer in respect of one or more instalments will not entitle you to treat the Contract as a whole as repudiated. e) If you fail to take delivery of the Goods or fail to give us adequate delivery instructions at the time stated for delivery then, without prejudice to any other rights available to us, we may store the Goods until actual delivery and charge you for all reasonable cost (Including Insurance) or storage; or at such time as we think fit sell the Goods and (after deducting all reasonable storage and selling expenses) account to you for any excess over the price or charge you for any shortfall below the Price of the Contract. f) Where a period is named for performance of the Contract, unless such period is extended by mutual written consent, you will accept performance within that period. g) For the avoidance of doubt, any defects or shortages in any delivery in the Goods generally or in the provision of the Services will not permit you to reject any goods or services whether supplied under the contract or any other contract between us. h) The customers will be made responsible for ensuring the delivery site is suitable, appropriate and accessible for delivery by a heavy goods vehicle. Any failure to suitably prepare the delivery site to accept the goods and/or services may result in an abortive delivery, chargeable to the customer. i) Delivery of goods has to last a maximum of 30 minutes for offloading the goods at the delivery site. Any time thereafter is charged as demurrage at a variable rate specified on the contract agreed upon. j) You will inspect the goods and/or Services immediately on delivery or completion and will, within 7 days give written notice to us of any matter or thing by reason of which you allege that the Goods and/or Services are not in accordance with the contract, failing which you will be deemed to accept the Goods and/or Services and pay for them in accordance with clause 4 above.

6. Risk and Property a) All risk associated with the Goods will pass to you on the earlier of completion or delivery at your premises (or those you have nominated) or the tendering of the Goods for delivery which you refuse. b) Irrespective of clause 6a above, or any other clause, the property in the Goods will not pass to you until we have received in cash or cleared funds payment in full of the price of the Goods and/or Services and all other Goods and/or Services agreed to be sold by us to you for which payment is then due, whether under this or any other contract. c) Until property in the Goods passes to you, you will; 1) Hold the Goods as our fiduciary agent and bailee and will keep the Goods separate from other of yours or third party’s Goods and property stored, protected, insured and identified as our property; 2) Hold the entire proceeds of any sale of the Goods in trust for us and not mingle this money with any other accounts or pay this money into any overdrawn bank account and ensure that this money remains readily available. 3) Deliver up of the Goods to us at our request. If you fail to immediately deliver Goods to us we will be entitled to enter upon any premises, or those of any third party where goods are stored, and repossess the Goods. d) You will not pledge or in any way charge any of the Goods which remain our property. However if you do, all monies owed by you to us will (without prejudice to any other right or remedy of the Company) immediately become due and payable. e) We will have a first and paramount lien over any and all Goods which are your property, for the time being in our possession, where any sums are due and owing under the Contract by you to us and whether the Goods are the subject to this or other contracts with ourselves. f) If you fail to pay all monies due under the contract we will; 1) Have the right to sell or dispose of such goods for such price as we think fit, acting as your agent, but without owing you any duty of care whatsoever; 2) Be entitled to use the proceeds of sale of any such Goods in the discharge of the monies due under the contract, or any other outstanding between us, along with any amounts due under cause 13, and remit any surplus to you afterwards. g) If any Goods, whether the subject of the contract or any other contract with us are admixed with; 1) Other goods which are your property or are processed with or incorporated in them, the product of this will become and/or will be deemed to be our sole and exclusive property; or 2) Other goods which are the property of any person other than yourselves or are processed with or incorporated in them, the product of this will become and/or will be deemed to be owned by us in common with that other person. h) If we allow possession of the goods or any other items belonging to us to pass to you on loan, risk of damage to or loss or deterioration of those goods or items will pass to you immediately upon you taking possession of the Goods or items in question. You will, at your own expense, insure the goods or items with a reputable insurance company, against all loss or damage to the full new replacement value of the goods or items and also against all risk to third party liability arising out of the ownership, presence or use of the goods or items. You will be required to produce, upon request, a copy of the cover note for the above insurance. i) If the goods are a total loss or stolen, you must promptly inform us and we may either require the goods to be replaced or you pay us the amount required to discharge your outstanding liability to us. j) You authorise us to contact your insurers and, if the goods are a total loss or have been stolen, consent to us disclosing the amount required to discharge your outstanding liability to us and, as your agent, to negotiate and agree with your insurers the terms of any insurance claim in respect of the goods and to receive any insurance proceeds payable. k) If your insurance fails to cover your liability to us, you will still be liable to us for any shortfall.

7. Warranties and Liabilities a) We will not be liable for goods in respect of any defect arising from fair wear and tear, wilful damage, negligence, abnormal working conditions, failure to follow our written or oral instructions, misuse, additions, alterations or repair of the goods without our express written approval. b) If you have examined the goods or have been provided with plans, drawings or specifications or other information by us relating to the goods, you must make your own judgment as a result of such examination or a plan or specification or other information. c) We will not, under no circumstances, be liable under the contract: 1) If you have not paid in full at that time any of our invoices on their due date; 2) If our representatives are denied full and free right of access; 3) To the goods and/or the site where the goods have been delivered or fitted; or 4) The site where the services are being performed; or 5) To where the goods are which services are being carried out. d) Nothing in these conditions will either restrict our liability for death or personal injury which arises out of our negligence. Your statutory rights are similarly not affected by these conditions where the goods are sold under a consumer transaction. e) Whilst we are under no obligation whatsoever to do so, we may at our own cost and entirely at our own discretion repair or rectify any defects in the goods and/or services which in each case are proved to us not to be in accordance with the contract by reason only of bad workmanship or materials supplied by us, provided in such a case that fault is notified to us in writing and as soon as reasonably practical and in any event within the period of 12 months from the date of supply of the goods or provision of the services as appropriate. f) We specifically exempt from the provisions of clause 7e any part or parts of the goods which are not manufactured by us. You will be entitled to the benefit of any rights obtained by us from such third party. g) We will not be liable to you by reason of any representation, or any implied warranty, condition or other term, or any duty at common law, or under the express terms of the contract, for any consequential loss or damage (whether for loss of profit or otherwise), costs, expenses or other claims for consequential compensation whatsoever (and whether caused by our negligence, employees or agents, or otherwise) which arises out of or in connection with the supply of the goods or their use by you or the provision of the services, except as expressly provided in these conditions. h) Save where expressly stated herein, no warranty, condition, description or representation on our part is given or implied by these conditions nor the contract is any warranty condition, description or representation to be taken to have been given or implied from anything said or written in negotiations between us or our respective representative by or on our behalf prior to the contract being entered into and all statutory and other warranties, conditions, descriptions or representations expressed or implied as to the state, quality or fitness of the goods and/or the services the subject of the contract are hereby expressly excluded to the full extent permitted by law. i) In the event of any claim being made against you, by reason of any matter in respect of which we may be liable under these conditions, you will be in default of your obligations under this clause if you do not notify us in writing of the claim within 14 days of receipt of the claim and, we will, notwithstanding other conditions (except for clause 7e) be under no liability to indemnify you in respect of any such claim. j) Notwithstanding the provisions of these conditions, in the event that we are found liable for any loss or damage the liability will not exceed the contractual price, save in circumstances where there is an effective insurance policy which will cover an amount exceeding this amount. k) The restrictions contained in these conditions are accepted by both of us as being fair and reasonable. In the event that any restrictions is held to be unforeseen in part, it will not affect the validity of the other restrictions which will be treated as separate provisions. l) We will not be liable for any loss, damage or consequential loss of any other claim arising out of failure of goods for which we have advised you require modification or repair you have failed to authorise such work for any reason whatsoever. Similarly if your specification for inspection and reporting of damage to equipment fails to allow for identification of potential defects in any goods that may require services to be performed on them, we will not be liable for any claims resulting in any subsequent failure of the goods.

8. Taxes/Domestication a) The customer agrees to assume exclusive liability for and to pay, indemnify and hold the Seller harmless from all sales or use taxes, title and registration fees, Value-added Taxes (VAT), domestication, personal property taxes or other taxes, tolls, levies, duties or governmental charges imposed in connection with the sale, delivery, import and/or domestication of the goods, or any services rendered by the customer in connection with this contract, including any penalties, fines or interest thereon (collectively, “Taxes”). b) Goods may be subject to customs control under temporary admission arrangements. The customer shall assume and comply with all applicable legal, tax and customs requirements in connection with the sale, transfer, use, importation, domestication and/or re-exportation of the goods. The customer shall provide the seller, upon request, with documentation evid

9. Drawings, plans etc.  a) All drawings, plans, tools and patterns used in the manufacture of the goods or supply of services together with all specifications, technical information and estimates remain our exclusive property even where the whole or part of the cost of such has been charged to you. Copyright will remain our property .All such drawings, plans, tools, patterns, specifications and estimates are confidential and will only be used by you for the purpose of considering any quotation for the contract and may not be divulged to a third party in any circumstances without our written authority. b) You agree (unless with our written consent) not to sell nor otherwise dispose of, to any third party, any goods the sale or disposal of which would infringe any letters patent or other intellectual property rights under which we are either the owner who are authorised to sell or manufacture the goods. c) Where goods are to be manufactured or any process is to be applied to the goods and/or services carried out by ourselves in accordance with specifications submitted by you, you will indemnify us against all losses, damages, costs, consequential losses, claims and expenses awarded against or incurred by us in connection with or paid or agreed to be paid by us in settlement of any such claim for infringement of any patent, copyright, design, trademark or other industrial or intellectual property rights of any other person which results from our use of your specification in producing and selling the goods and/or carrying out services.

10. Force Majeure a) We will not be liable to you, or be deemed to be in breach of these conditions, by reason of any delay in performing, or any failure to perform, any of our obligations in relation to the goods and/or services. If the delay or failure was due to any cause beyond our reasonable control and expectation.

11. Health and Safety a) Any liability for ensuring compliance with any requirements (statutory or otherwise) concerning health safety or welfare or any other matter which may relate to or affect the specification of the goods and/or to ensure the safety of our servants and agents whilst carrying out the contract on any premises designated by you rests exclusively on you. b) Where the contract is for the provision of services and in particular for cleansing of goods, you will inform us in writing of the nature of any substance which has been carried or contained in the goods. You will indemnify us against all and any claims whatsoever nature including indirect and consequential losses arising from either the nature of such substance or your failure to comply with these conditions.

12. Termination a) The contract set out between the customer and supplier may be terminated if; 1) you default in or commit a breach of any of your obligations to us; or 2) any judgment is entered against you or distress or execution is levied upon your property or assets or any part of them; or 3) you make or offer to make any arrangement or composition with your creditors or commit any act of bankruptcy or if any petition or receiving order is presented or made against you; or 4) you, if a limited company, have any resolution or petition to wind up such company passes or presented (otherwise than for reconstruction or amalgamation); or 5) a receiver, administrative receiver, administrator or manager of your undertaking, property or assets or any of them is appointed; or 6) you suffer any analogous proceedings under foreign law; then we will have the right immediately to determine the contract then subsisting on written notice of determination being given to you and any subsisting contract will at our option have been deemed to be terminated without prejudice to any claim or right to suspend further deliveries and in respect of all goods which have been delivered but not paid for; the monies due for those goods will become immediately due and payable.

13. General a) No rights are to be conferred on any third party unless specifically agreed to in writing by both of us. This does not affect any rights or remedy of a third party which exists. b) We reserve the right to subcontract the performance of the whole or part of the contract. c) These conditions and any contract will be construed in all respects in accordance with Swiss Law and will be deemed to have been made in Switzerland. d) All the disputes between the parties arising out of or in connection with these conditions or with any contract are submitted to the exclusive jurisdiction of the Courts of Lugano, Switzerland e)No time indulgence or waiver of any breach of these conditions will be a waiver of any other or and subsequent breach. Failure by the company to enforce at any time any provision of these conditions will in no way be construed to be a waiver of such provisions nor in any way affect the validity of these conditions or any part of our rights to enforce each and every provision of these conditions. f) Any notice required or permitted to be given under these conditions will be in writing and addressed to the other party’s registered office or principal place of business or such other address as may be from time to time notified by one party to the other. g) The contract and these conditions are personal to the parties and may not be assigned at law or in equity without the prior written consent of the other party.

Id 42 - Sale Terms and Conditions – Rev. 0 – 01.02.2018

Contact Us

Contact Us

  • Sogeco International Middle East DWC LLC

    DWC Business Center,
    Dubai Aviation City | Logistic City
    Building A3, Level 1, Office No. 127
    P.O. Box 712280 Dubai,
    United Arab Emirates

    +971 (0) 4 887 9565

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    25.0772,55.3093

  • Sogeco International SA

    Paradiso, Switzerland

    45.9917,8.94523

  • Sogeco Italian Branch

    Via Montenero, 2
    20060 Truccazzano, Milan
    Italy

    + 39 02 95369204

    Fax: + 39 02 95369205

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    45.4845,9.4695

  • Sogeco India Agency

    GG Marine Containers - Mani Pillai
    A-444,Balaji Bhavan, Plot #42/A,
    Sector-11, CBD, Belapur,
    Navi Mumbai - 400614

    +91 22 4127 0080

    Fax: +91 98 2008 0928

    This email address is being protected from spambots. You need JavaScript enabled to view it.

    19.0281,73.0412

  • Sogeco China Agency

    Daniel Wong
    No. 2-212, Wanke Jinjie,
    East Situmiao Road
    Mobile phone + 86 139 51057056

    32.3972,119.436

  • Sogeco International SA

  • Via S. Salvatore, 13

  • 6900, Paradiso

  • Switzerland

Sogeco Group

Sogeco Italy Branch

Sogeco Italia Srl
Via Montenero, 2
20060 Truccazzano, Milan
Italy

Tel:+ 39 02 95369204

Fax: + 39 02 95369205

This email address is being protected from spambots. You need JavaScript enabled to view it.

Sogeco India Agency

G G Marine Containers Pvt Ltd - Mani Pillai
Office # 1602, Fairmount, 16th Floor, Plot No.4,5 & 6, Sector-17,
Sanpada, Palm Beach Rd, Navi Mumbai - 400705. Maharashtra - India

Tel:+91 22 4979 7878

Mob:+91 98200 80928

This email address is being protected from spambots. You need JavaScript enabled to view it.

Sogeco China Agency

Daniel Wong
No. 2-212, Wanke Jinjie,
East Situmiao Road
Yangzhou (Jiangsu Province)

Mob: +86 139 51057056

This email address is being protected from spambots. You need JavaScript enabled to view it.

Sogeco International Middle East DWC LLC

DWC Business Center,
Dubai Aviation City | Logistic City
Building A3, Level 1, Office No. 127
P.O. Box 712280 Dubai,
United Arab Emirates

Tel:+971 (0) 4 887 9565

This email address is being protected from spambots. You need JavaScript enabled to view it.

Read more: Contact Us

Quality Policy

SOGECO International SA, with the aim of marketing and renting avant-garde containers of all types through the use of advanced know-how, has as its primary objective the continuous research and improvement of quality in all its forms, excelling in offering products and services up to the demands, taking into account the type of activity in which it is specialized, the particular needs of its customers, the globalization of the market.

SOGECO International SA, in addition to regularly supplying the largest shipping companies, is active in all fields of container supply, priding itself on a great experience in its field, with an excellent reputation at international level, both in terms of solvency of customer requests and service delivery. This allowed the creation of an important network through the cooperation with companies all over the world and participating and sponsoring international events and fairs.

The Company proceeds with its activity, pursuing values deemed fundamental for its operational excellence:

  • Provide first-class products and services, continuously improved, and exceeding customer expectations, aiming at the highest reachability through its online portal and allowing customized solutions, constantly measuring the quality perceived by the customers themselves;
  • Promote company growth through an approach based on risk management and processes of the organization, considering the positive, negative, internal and external factors of the organization;
  • Treat each supplier as an integral part of the overall ability to meet customer needs;
  • Encourage, train and help all staff to fully develop their skills, promoting teamwork and individual initiative in a culture of empowerment;
  • Being first in terms of quality, speed and reliability, speeding up all process types at all organizational levels, inspiring excellent group and individual performance, recognizing and rewarding the successes appropriately;
  • Provide adequate resources in order to achieve the objectives set;
  • Pursue continuous and sustainable expansion at local and international level
  • Systematically encourage continuous improvement

 

This Policy is pursued by the Senior Management of SOGECO International SA in order to allow the application, improvement and development of its Quality Management System.

Furthermore, the Top Management is committed to ensuring that the above is reviewed and updated whenever any change in the strategic corporate guidelines is disclosed, implemented and shared by the entire company structure and that it is made available, to all Interested Parties.

The General Director
SOGECO International SA

Our Containers

Our Containers

Brand New, One Trip or Cargo Worthy

Brand New

The “brand new” containers are the containers empty positioned from factories. This category includes 6’, 8’ and 10’ storage units,20’ and 40’ Open Tops, 20’ and 40’ Flat Racks, 40' Open Side, 20’ and 40’ High Cube Reefers (standard or “Polar”), 20’ Tanks as well as all accommodation or other special or converted containers. These units have a CSC plate valid for 5 years from their manufacturing date. As a rule, all containers used for international transport must be fitted with a valid safety approval plate (the CSC Plate).

One Trip

The “one trip” containers are the containers positioned with cargo  to Sogeco’s worldwide markets through a dedicated sea or rail voyage  (latter for 40’  dry vans only). This category of containers is  therefore used only for a few weeks before being returned to our nominated depots and includes all Dry Vans (20’,40’standard or High Cube), Double Door or "Tunnel" containers (20’,40’ Standard or High Cube)  and Open Side containers (20’ and 20’ High Cube). These units have a CSC plate valid for 5 years from their manufacturing date.

ISO Converted

ISO containers modified according to customers’ requirements

Cargo Worthy

The “Cargo Worthy” containers, also known as “old containers”, “second hand containers”,“last trip containers ”,“last voyage containers”,“sea worthy containers”, “ wind and water tight containers (WWT) ”… are  the containers used for a few or several years. Sogeco has graded its used containers for sale or lease as “Cargo Worthy”,“Cargo Worthy Selection” and “Cargo Worthy Selection Plus” based on containers’ age  and their structural and cosmetic condition. These units, upon request, come with  CSC plate and relevant certificate issued by the  Classification Society valid for 12 months from the date of issuance. Upon customer’s request, Sogeco customizes sold containers in Sogeco’s depots in Genoa, Milan and Venice and delivers them to customer’s premises by standard or self sustained truck.

  • Multi Stock

    • 20'/40' DV/HC
    • 20'/40' Open Top
    • 20'/40' Flat Rack
    • 20'/40' Reefer
    • 20' Tank

    Read more

  • Multi Stock Special Containers

    • 6'/8'/10' Minibox
    • 40' Double Door DV/HC
    • 20' Double Door DV/HC
    • 20' Open Side DV/HC
    • 40' Self Storage

    Read more

  • Polar Box

    • 10'/20' Polar Box
    • 40' HC Polar Box

    Read more

  • Offshore

    Containers for storage for the oil and gas industry

    Read more

  • Multi House Container System

    Containers becoming versatile living spaces

    Read more

Multi Stock

Containers for static storage and maritime transportation
  • Dry Van & HC 20'/40'
  • Open Top 20'/40'
  • Flat Rack 20'/40'
  • Reefer 20'/40'
  • Tank 20'
Sogeco Multistock container system

20' DV/HC

  • Technical Details 20' DV

    • External Dimension LxWxH6058 x 2438 x 2591
    • Internal dimension LxWxH5898 x 2352 x 2393
    • Door Opening WxH2340 x 2280
    • Cubic Capacity33.2
    • Tare2.180
    • Payload28.300
    • Maximum Gross Weight30.480
  • Technical Details 20' HC

    • External Dimension LxWxH6058 x 2438 x 2896
    • Internal dimension LxWxH5898 x 2352 x 2698
    • Door Opening WxH2330 x 2580
    • Cubic Capacity37.4
    • Tare2.250
    • Payload28.230
    • Maximum Gross Weight30.480

Dimensions ± 5mm; weight ± 2%

40' DV/HC

  • Technical Details 40' DV

    • External Dimension LxWxH12192 x 2438 x 2591
    • Internal dimension LxWxH12032 x 2352 x 2393
    • Door Opening WxH2340 x 2280
    • Cubic Capacity67.8
    • Tare3.740
    • Payload26.740
    • Maximum Gross Weight30.480
  • Technical Details 40' HC

    • External Dimension LxWxH12192 x 2438 x 2896
    • Internal dimension LxWxH12032 x 2352 x 2698
    • Door Opening WxH2340 x 2585
    • Cubic Capacity76.4
    • Tare3.800
    • Payload28.700
    • Maximum Gross Weight32.500

Dimensions ± 5mm; weight ± 2%

20'/40' Open Top

  • Technical Details 20' OT

    • External Dimension LxWxH6058 x 2438 x 2591
    • Internal dimension LxWxH5898 x 2352 x 2384
    • Door Opening WxH2330 x 2244
    • Cubic Capacity32.8
    • Tare2.400
    • Payload28.080
    • Maximum Gross Weight30.480
  • Technical Details 40' OT

    • External Dimension LxWxH12192 x 2438 x 2591
    • Internal dimension LxWxH12032 x 2346 x 2348
    • Door Opening WxH2330 x 2244
    • Cubic Capacity66.4
    • Tare3.750
    • Payload26.730
    • Maximum Gross Weight30.480

Dimensions ± 5mm; weight ± 2%

Container Open Top Sogeco - Internal

40' OT Converted

Technical Details 40' OT Converted

  • External Dimension LxWxH12192 x 2438 x 2591
  • Internal dimension LxWxH12032 x 2346 x 2348
  • Door Opening WxH2330 x 2244
  • Cubic Capacity66.4
  • Tare3.900
  • Payload26.000/20.000
  • Maximum Gross Weight30.000/24.000
  • Stacking91.440 Kgs

Dimensions ± 5mm; weight ± 2%

Container Open Top Rebuild - Internal

20'/40' Flat Rack

  • Technical Details 20' Flat Rack

    • External Dimension (Base Bottom Casting)LxW6058 X 2438
    • External Dimension (End Frame Erected) H2591
    • External Dimension (End Frame Folded) H370
    • Internal Dimension (Between End Panels) L6038
    • Internal Dimension (Between Corner Posts) L5632
    • Internal Dimension (Over Bottom Side Rail) W2194
    • Internal Dimension (Between Corner Post) W2226
    • Tare2800 Kgs
    • Payload31200 Kgs
    • Maximum Gross Weight34000 Kgs
  • Technical Details 40' Flat Rack

    • External Dimension (Base Bottom Casting)LxW12192 X 2438
    • External Dimension (End Frame Erected) H2591
    • External Dimension (End Frame Folded) H 648
    • Internal Dimension (Between End Panels) L 12064
    • Internal Dimension (Between Corner Posts) L 11652
    • Internal Dimension (Over Bottom Side Rail) W2374
    • Internal Dimension (Between Corner Post) W2220
    • Tare5100 Kgs
    • Payload47400 Kgs
    • Maximum Gross Weight52500 Kgs

Dimensions ± 5mm; weight ± 2%

Polar Box

Multi Featured refrigerated containers for static storage

The Polar Box represents a long waited innovation in the domestic reefer container market. Refrigerated containers used on land require features that guarantee an easy usage of the container.

That is why all users can easily open the door thanks to the new handle, roll in their cargo thanks to the access ramp, more easily clean the floor and walk on it thanks to its flat design, clearly see their cargo inside thanks to the concealed LED lighting, open the door also from the inside thanks to the internal door release button or activate the siren thanks to the emergency button.

This is the Polar Box. Safe and easy.

  • Polar Box Super Silent 20'

    • External Dimension LxWxH6058 x 2438 x 2591
    • Internal dimension LxWxH5317 x 2292 x 2308
    • Door Opening WxH2196 x 2251
    • Cubic Capacity28,1
    • MachineryCIBIN
    • Power supply400 - 3 - 50 Hz
    • External socket5 poles(3 phases+earthing+nautral;16A)
    • Setting temperature-20°/+20° C
  • Polar Box Super Cold 20'

    • External Dimension LxWxH6058 x 2438 x 2591
    • Internal dimension LxWxH5462 x 2294 x 2308
    • Door Opening WxH2290 x 2256
    • Cubic Capacity28,9
    • MachineryThermo King Magnum Plus/Daikin LXE10
    • Power supply400 - 3 - 50 Hz
    • External socket type4 poles (3 phases + earthing; 32 A)
    • Setting temperature-30°,-40°/+30° C
  • Polar Box Super Cold 40' HC

    • External Dimension LxWxH12192 x 2438 x 2896
    • Internal dimension LxWxH11596 x 2294 x 2613
    • Door Opening WxH2290 x 2596
    • Cubic Capacity69.5
    • MachineryThermo King Magnum Plus/Daikin LXE10
    • Power supply400 - 3 - 50 Hz
    • External socket type4 poles (3 phases + earthing; 32 A)
    • Setting temperature-30°,-40°/+30° C
  • Polar Box Super cold 10'

    • External Dimension LxWxH2998 x 2430 x 2591
    • Internal dimension LxWxH 2440 x 2291 x 2282
    • Door Opening WxH2290 x 2264 X 2221
    • Cubic Capacity12.5
    • Payload8000
    • Tare2000
    • MachineryDaikin LXE10
    • Power supply400 - 3 - 50 Hz
    • Operating power6/8 KWz
    • External socket type3 poles + earthing: 32 A
    • Setting temperature-30°,-40°/+30° C

Dimensions ± 5mm; weight ± 2%

Sogeco Polar Box
  • Easy to open door
  • Ceiling and Lighting
  • Curtain Shut And Fitted Ramp
  • Flat Floor
  • Emergency And Light Switches

20'/40' Reefer

  • Technical Details 20' Reefer

    • EXTERNAL DIMENSION LXWXH6058 x 2438 x 2591
    • INTERNAL DIMENSION LXWXH 5458 x 2269 x 2262
    • DOOR OPENING WXH2290 x 2267
    • CUBIC CAPACITY28
    • MachineryCarrier/Daikin/Thermo King
    • Power supply400 - 3 - 50 Hz
    • External socket type4 poles (3 phases + earthing; 32 A)
    • Setting temperature-25°/+25° C
  • Technical Details 40' HC Reefer

    • EXTERNAL DIMENSION LXWXH12192 x 2438 x 2896
    • INTERNAL DIMENSION LXWXH 11587 x 2290 x 2539
    • DOOR OPENING WXH2290 x 2572
    • CUBIC CAPACITY67.3
    • MachineryCarrier/Daikin/Thermo King
    • Power supply400 - 3 - 50 Hz
    • External socket type4 poles (3 phases + earthing; 32 A)
    • Setting temperature-25°/+25° C

Dimensions ± 5mm; weight ± 2%

Multi Stock Special Containers

Special containers for static storage
  • Minibox 6'/8'/10'
  • Double Door 20'/40'
  • Open Side 20'/40'
Sogeco Multistock container system

6'/8'/10' Mini Box

  • Technical Details 6'

    • External Dimension LxWxH1970 X 1954 X 1900
    • Internal dimension LxWxH1888 X 1888 X 1732
    • Door Opening WxH1854 X 1655
    • Cubic Capacity6
    • Tare650
    • Payload4,000
    • Maximum Gross Weight4,650
  • Technical Details 8'

    • External Dimension LxWxH2438 x 2200 x 2250
    • Internal dimension LxWxH2287 x 2112 x 2052
    • Door Opening WxH1904 x 2066
    • Cubic Capacity9,5
    • Tare880
    • Payload4.210
    • Maximum Gross Weight5.000
  • Technical Details 10'

    • External Dimension LxWxH2991 x 2438 x 2591
    • Internal dimension LxWxH2840 x 2350 x 2393
    • Door Opening WxH2340 x 2280
    • Cubic Capacity16
    • Tare1.300
    • Payload8.860
    • Maximum Gross Weight10.160

Dimensions ± 5mm; weight ± 2%

20' Open Side DV/HC

  • Technical Details 20' Open Side DV

    • Misure esterne LxWxH6058 x 2438 x 2591
    • Internal dimension LxWxH5898 x 2287 x 2302
    • Door Opening WxH2226 x 2189
    • Side Door Opening WxH5702 x 2189
    • Cubic Capacity31.1
    • Tare2.830
    • Payload21.170
    • Maximum Gross Weight24.000
  • Technical Details 20' Open Side HC

    • External Dimension LxWxH6058 x 2438 x 2896
    • Internal dimension LxWxH5898 x 2288 x 2607
    • Door Opening WxH2226 x 2487
    • Side Door Opening WxH5702 x 2494
    • Cubic Capacity35
    • Tare3.500
    • Payload20.500
    • Maximum Gross Weight24.000

Dimensions ± 5mm; weight ± 2%

  • Container Open Side Sogeco

  • Container Open Side Sogeco

  • Container Open Side Sogeco

20' Double Door DV/HC

  • Technical Details 20' Double Door DV

    • External Dimension LxWxH6058 X 2438 X 2591
    • Internal dimension LxWxH5844 X 2352 X 2393
    • Door Opening WxH2343 X 2280
    • Cubic Capacity32.9
    • Tare2,355
    • Payload28,125
    • Maximum Gross Weight30,480
  • Technical Details 20' Double Door HC

    • External Dimension LxWxH6058 x 2438 x 2896
    • INTERNAL DIMENSION LxWxH5844 x 2352 x 2698
    • Door Opening WxH2340 x 2585
    • Cubic Capacity37.1
    • Tare2.480
    • Payload28.000
    • Maximum Gross Weight30.480

Dimensions ± 5mm; weight ± 2%

  • 20 Pedestrian Door 2

  • 20 Pedestrian Door

  • 20 Self Storage 45 Cargo Door

40' Double Door DV/HC

  • Technical Details 40' Double Door DV

    • External Dimension LxWxH12192 X 2438 X 2591
    • Internal dimension LxWxH11978 X 2352 X 2393
    • Door Opening WxH2340 X 2280
    • Cubic Capacity67.3
    • Tare4,000
    • Payload26,480
    • Maximum Gross Weight30,480
  • Technical Details 40' Double Door HC

    • EXTERNAL DIMENSION LXWXH12192 x 2438 x 2896
    • INTERNAL DIMENSION LXWXH11978 x 2352 x 2698
    • DOOR OPENING WXH2340 x 2585
    • CUBIC CAPACITY75.9
    • Tare4.120
    • Payload28.380
    • MAXIMUM GROSS WEIGHT32.500

Dimensions ± 5mm; weight ± 2%

40' Self Storage

Technical Details 40' 4/6/8 doors

  • EXTERNAL DIMENSION LXWXH12192 X 2438 X 2591
  • INTERNAL DIMENSION LXWXH11978 X 2352 X 2393
  • DOOR OPENING WXH2340 X 2280
  • PEDESTRIAN DOOR OPENING WXH1179 X 2290
  • CUBIC CAPACITY67.3
  • Tare4,200/4,600/4,900
  • Payload7,100 /7,400/7,800
  • MAXIMUM GROSS WEIGHT12.000

Dimensions ± 5mm; weight ± 2%

  • 8 Side Doors Closed

  • 8 Side Doors Open

  • 8 Side Doors Inner View

  • 40' 4 Side Doors

  • 40' 6 Side Doors

20' Tank

Technical Details 20' Tank

  • External Dimension LxWxH6058 X 2438 X 2591
  • Cargo capacity21,000 to 26,000 LTR
  • Tare weight3,540 to 3,830 Kgs
  • Maximum Gross Weight36,000 Kgs
  • Ambient Temperature Range-40°C to +65°C
  • Maximum Cargo Teperature130°C

Dimensions ± 5mm; weight ± 2%

Offshore

Containers for storage for the oil and gas industry

SOGECO International supplies an extensive range of customers with containers of different size and type engineered for use in the offshore Oil and Gas industry. All units are designed, built and certified to DNV regulations. Units are DNV certified for offshore use , ISO rated and CSC plated for multimodal transportation.

Sogeco Polar Box
  • Technical Details 8' Offshore

    • External Dimensions LxWxH6058 X 2438 X 2591
    • Internal Dimensions LxWxH2184 x 2242 x 2242
    • Door Opening Width x Height (mm)2200 x 2264
    • Volume18 cubic meters
    • Tare weight1,750 Kgs
    • Maximum Gross Weight9,750 Kgs
  • Technical Details 10' Offshore

    • External Dimensions LxWxH2991 x 2438 x 2591
    • Internal Dimensions LxWxH2804 x 2270 x 2243
    • Door Opening Width x Height (mm)2200 x 2264
    • Volume18 cubic meters
    • Tare weight2,400 Kgs
    • Maximum Gross Weight10,000 Kgs
  • Technical Details 20' Offshore

    • External Dimensions LxWxH6068 x 2438 x 2591
    • Internal Dimensions LxWxH5865 x 2260 x 2220
    • Door Opening Width x Height (mm)2200 x 2264
    • Volume18 cubic meters
    • Tare weight3,800 Kgs
    • Maximum Gross Weight24,000 Kgs

Dimensions ± 5mm; weight ± 2%

Multi House

Modules used as office, accommodation, disaster relief

Being a modular container, it can be joined to create larger spaces and can be stacked 3-high. Offered layouts for a standard 20 foot unit range from single or double room to ablution and sanitary containers. Multi House is the flat-pack container renowned all over the world. Individual units or composite and modular structures for all accommodation solutions in hot and cold climates. Ideal solution whenever you have a need for any “off the shelf” containerized space.

Multihouse Container System Classic

Where do you want to buy or rent MULTIHOUSE?
Our
Services

Whatever your needs are, we can satisfy your demand because our expertise ranges from new to used equipment, anywhere worldwide.

  • Trading
    of brand new,first trip and second hand containers

  • Leasing
    and one way leasing of ISO containers

  • Customization
    of sold containers with buyer’s colour and logo

  • Transport
    of our sold and leased containers

  • Storage
    through 70,000 square meters of storage space

  • Conversions
    of ISO containers according to customers’ layout

Read more: Our Containers

More Articles ...